Set Building, Tree
Leave a comment

adding little branches

Share on FacebookTweet about this on TwitterPin on Pinterestshare on TumblrGoogle+Share on StumbleUponDigg thisShare on LinkedIn

I made the little branches out of 0.9mm aluminum wire and masking tape. Lets say you need 8 little branches at the end; take 8 wires and separate into 2 and 4 and 8,.. then cover all with masking tape.

I used yarn when adding the little branch to the main tree branch to make it connected nicely without a thickness difference and covered connection points with masking tape..

Leave a Reply

Your email address will not be published. Required fields are marked *